• Type: Vertical Pulsating Vacuum Autoclave
  • Class: Class B
  • Control: Microprocessor
  • Door: Automatic lifting door
  • Display: LCD color touch screen display
  • Drying system: Vacuum drying
  • Steam generator: Separate steam generator
  • Vacuum pump: Yes
  • Sterilization program: Liquid, Instrument, Textile, Rubber, User-defined, Vacuum leakage test, B & D test
  • Water tank: Yes
  • Printer: Yes
  • Sterilization box: 2 PCS
  • Language: English
  • Voltage: 220V, 50Hz, single-phase
  • 7” capacitive LCD color touch screen, fully automatic controlled, easy to operate on.
  • Lifting type door, which is more convenient to place and fetch the objects from the autoclave.
  • Dynamically showed the temperature, pressure, time, vacuum rate, drying, alarm, water level, and the full cycle.
  • The whole procedure from water inlet, pulse vacuum, heating, sterilizing, water outlet, exhausting to vacuum drying, which are all automatically by one-key operation.
  • Intellectualize vacuum drying system to guarantee the residual humidity of instrument less than 0.2% .
  • The vacuum rate can reach -0.081Mpa, it fits various instruments, including packed, unpacked, dressings, solid, A, B type hollow whether multi-apertures or inset pipes.
  • With 7 cycles: Instrument, Textile, Rubber, Liquid, User-defined, vacuum leakage test, BOWIE & DICK test.
  • Equipped with the PT/TT testing connector, easy to run the testing.
  • Equipped with Germany SARTORIUS Sterile ventilation filter MIDISART 2000 0.2 um, which ensure the air is sterile, prevent the contamination.
  • Multiple pulse vacuum drying after sterilizing, ensure the nice sterilizing.
  • Adopted independent steam generator, with high heating efficiency.
  • Steam-water inner circulation system: No steam discharge and the environment for sterilizing will be clean and dry.
  • Automatically shut off with beep reminding after sterilization.
  • Internal material: Stainless steel 304, External material: Stainless steel 304 and electrostatic powder coated stainless steel.
  • Equipped with a printer.
  • Accessories: Drainage hoses, drain(exhaust) bucket, stainless steel baskets.
  • Heater protection
  • Anti-dry heating
  • Safety interlock door: The program can’t start up when the door is unlocked under normal condition. Door is locked and the door can’t open when pressure in chamber.
  • Over-temperature protection: Adapt PT100 with accuracy class A for temperature control in chamber, collect temperature data in real-time, protect and alarm when temperature higher than default value.
  • Over-pressure protection: The relief valve starts to release pressure automatically when the pressure in chamber and steam generator exceed the default value.
  • Automatic release safety valve.
  • Over current protect.
  • Electric safety protective device: Fuse protects control units when short circuit or overload occurs.
  • Overheating protection device: High temperature deviation in chamber actuates protective device cuts off the heating source immediately.
  • Vacuum pump overload: The vacuum pump stops and alarms once its motor is overload or blocked when vacuum pump running.

Product Parameters

Model HS-VSA
Max. Working pressure 0.23Mpa
Working pressure 0.22Mpa
Working temperature range 105 – 134℃
Vacuum rate -0.081Mpa
Accuracy of temperature display 0.1℃
Sterilization time 0 – 99 min
Drying time 0 – 99 min
Heat average ≤±1℃

Product List

Model Chamber Size(mm) Outer Size(mm) Packing Size(mm) G.W. / N.W. Power
HS-VSA60 60L / Ø396×490 686×556×913 786×656×1013 210/180 kg 5.4 KW
HS-VSA80 80L / Ø396×650 686×556×1035 786×656×1135 230/200 kg 5.4 KW
HS-VSA100 100L / Ø480×560 840×600×970 940×610×1000 300/270 kg 6.0 KW
HS-VSA120 120L / Ø480×660 840×600×1060 940×610×1075 325/ 295 kg 6.0 KW

Send your message to us